With a dining table and chairs in mind I went to our local hardwood dealerâ€”Helena Hardwoodsâ€”in search of wood and inspiration. Dave carries many live edge slabs and we are lucky to have this source right in our hometown. After looking through many with him I came upon two that grabbed me.
That is how this table started. I bought them and let them sit in my shop for a while. I knew that I wanted to make the table top using the live edge of these slabs and use the remaining wood for the seats of the chairs. Although the two slabs would open into a bookmatached pair, they would be too wide at one end and narrow at the other for the table I wanted. So I decided to flip them end for end and join them on an angle. With this decided, I soon realized I did not have enough wood for six seats. So back to Dave’s for more wood to match.
With the top flattened and glued up and the seat blanks made, I started on the structural parts of the chairs. The original design I came up with a few years ago and have refined it along the wayâ€”recently adding arms. These chairs use the joinery developed by Sam Maloof which allows for a very flowing organic design and a wonderful play of hard and soft lines. They are also very comfortable.
Then back to the table and deciding a base for it. This is always a challenge for meâ€”to design a base for a live edge piece that supports it in every wayâ€”structurally and aestheticallyâ€”without detracting from it. My original intention was a four legged base, but it soon became apparent that would not work with the captain’s chairs at the ends. So I decided on a trestle base that made room for both the chairs at the ends and ample room on the sides.
Although I have a very good idea of what the wood I am using will look like finished, it is still somewhat of a surprise when I actually put the first coat of finish on and the beautiful grain reveals itself. I saw a large rather shallow river with beautiful ripples and color. When describing this to my neighborâ€”an avid fishermanâ€”he reminded me that this describes the Madison River here in Montana.
A further connection came when I remembered that my father had built a cabin on the Madison just outside the Park in West Yellowstone many years ago. It still stands. Too bad it is not still in the family!
Working with woodâ€”especially live edge slabsâ€”is a process. For me it is a process of letting the wood speak to me when I first see it, interacting with it all through the construction, and still listening and delighting when it reveals itself completely during the finishing.
“River’s Rift,” a play on the shape of a canyon, is an unusually figured piece of curly walnut with bloodwood accents. The slab is cut down the middle with the live edges turned inward and Â bookmatched. Walnut slabs make up the legs. A matching set of bloodwood plates and chopsticks with ebony rests accents the table.
“River’s Rift” may be used as a coffee table or a Japanese-style dining table, guests sitting on floor cushions.
A bar stool, dining stool or drafting stool … this is a versatile piece of Tim’s urban organic style. The seat is hand carved of quilted birch and fits any shape bottom. The quilted birch back provides excellent lumbar support in just the right place. Legs are cherry with purple heart accents.
With it’s comfortable ergonomic design and light weight sturdy construction, this stool encourages lingering over a marguerita orÂ cappuccinoÂ at the bar.
Maureen’s stool can be custom ordered as a single stool or a set. Tim will make them in different woods, customÂ heights or back-rest styles. The leg rungs can also be customized to the perfect height for you.
The perfect piece for a tight kitchen or dining area, the gate leg table of cherry folds down to 1 ft. by 3 ft. and expands to 5 feet long to seat 6 comfortably. The gate legs make a beautiful play on their curves,open or closed. The unique design of the legs leaves plenty of knee clearance.
“Forest Muse,” is made from an exceptionally beautiful live edge slab of walnut from the crotch of the tree. Because the simple pencil drawer is hidden just under the desktop., Forest Muse may be used as a desk, sofa table, accent table or for dining.
The natural splits in the slab are held together with bloodwood butterfly keys for a subtle accent.
The chair of walnut with curly maple accents can be used as a desk or dining chair. The sculpted wood seat and curved back stays make for extremely comfortable sitting.
The awesome Yellowstone River Canyon came to mind when I saw this beautiful piece of curly mango. With it’s rich colors and undulating grain, it calls to mind a stone canyon carved by one of the most powerful rivers in the Rockies.
Tim hand carved the lacewood trestle to expose the swirling grain as if it were the river deep in the canyon.Â One end of the mango slab is carved to echo the rippling surface of a river. The legs are curved, tapered laminations of 9 pieces of mahogany and paduak wood.
“The Yellowstone” functions equally well as a sofa table or hall table. It can also be used as a sculptural accent piece.
Tim’s rocking chair design is a mellow play of hard and soft edges that carry through the entire rocker.
The chair began as a simple line drawing, Â pulled from a dream. The organic joinery came about after Tim attended a workshop taught by Sam Maloof. The combination became Tim’s unique adaptation of a masterful design.
The seats are hand carved so anyone sitting in this rocker feels absolutely settled into the chair. The curved back stays give excellent lumbar support and the head rest is shaped to cradle your head when you lean back. The strong, laminated rockers are carefully designed to settle you back at the perfect comfortable angle.
“Dreamtime,” left, is of Lacewood (Australian Silky Oak) with accents of Curly Maple. Â “River’s Bend,” right, is of highly figured Quilted Birch with Curly Mango accents.
“Tipsy”, a wine rack inspired by the shape of a wine bottle, is made of curved, tapered laminations of Cherry with Bloodwood accents. It stands about five and a half feet high and holds twenty two wine bottles. The wine rack can be custom ordered in smaller or larger sizes. It can also be made as a set, with each section a slightly different curving shape.
An organic approach to Old World style, using the deep color of Cocobollo wood. This chair plays with hard and soft lines. The chair’s elegant organic curves embrace and support your back. It’s shape makes for extended comfortable sitting.
The seat is of blackberry leather that compliments the varied tones of red in the cocobollo.
This chair was custom designed as a dining set. Tim can create this same or a variation of this chair in any hardwoods, with your choice of leathers or upholstery for the seat. Please inquire on our “custom orders” page.
This custom designed master bedroom set includes a mahogany and mango bed with curving headboard, a curved footboard that also functions as a seat, two bedside tables and a mahogany mirror above the owner’s black dresser.
The graceful Asian inspired lines of African Mahogany frame highly figured Curly Mango panels. The footboard curves out forming a seat that reflects the curves of the headboard and mirror. The overall feeling of the furniture contributes to a peaceful and restful bedroom atmosphere.
There is a bookshelf neatly tucked in the most convenient place — right up near the top of the bed. Isn’t this where books and papers tend to collect anyway? Why not make an intentional place to keep your bedtime reading?
The mahogany mirror matches the bed, reflected here.